Focus on Cellulose ethers

Nhazi pụrụ iche maka Mhec Hydroxyethyl Methyl Cellulose

Nkọwa dị mkpirikpi:

CAS: 9004-65-3 Hydroxypropyl MethylCellulose (HPMC) na-ọtụtụ-eji na-ewu, ọgwụ, nri, ịchọ mma, ncha, akọwa, dị ka thickener, emulsifier, film-bụbu, ihe nchikota, dispersing gị n'ụlọnga, na-echebe colloid.We nwere ike inye mgbe niile. ọkwa HPMC, na nwekwara ike inye gbanwetụrụ HPMC dị ka ndị ahịa chọrọ. Mgbe emezigharịrị na ọgwụgwọ elu, anyị nwere ike nweta ihe a na-agbasa na mmiri ngwa ngwa, gbatịa oge oghere, mgbochi-sagging, wdg.


  • Ọnụ ọgụgụ nke Min.1000 n'arọ
  • Port:Qingdao, China
  • Usoro ịkwụ ụgwọ:T/T;L/C
  • Usoro nnyefe:FOB, CFR, CIF, FCA, CPT, CIP, EXW
  • Nkọwa ngwaahịa

    Mkpado ngwaahịa

    N'ịnọgide na nkwenkwe nke "Ịmepụta ngwaahịa ndị dị elu na ime enyi na ndị si n'akụkụ ụwa nile", anyị na-etinye mmasị mgbe nile nke ndị ahịa na mbụ maka Special Design for MhecHydroxyethyl Methyl Cellulose, Ogo kachasị elu na ọnụ ahịa asọmpi na-eme ka ngwaahịa anyị na ngwọta anyị nwee ekele maka aha dị elu gburugburu okwu ahụ.
    N'ịnọgide na nkwenkwe nke "Ịmepụta ngwaahịa ndị dị elu na ime enyi na ndị si n'ụwa nile", anyị na-etinye mmasị mgbe niile maka ndị ahịa.Cellulose Ether Mhc Mhpc Hec, Hydroxyethyl Methyl Cellulose, Hydroxylpropyl Methyl Cellulose, Okwukwe anyị bụ na-eme ihe n'eziokwu mbụ, otú anyị dị nnọọ na-enye ndị ahịa anyị ngwaahịa dị elu. Nwere olile anya na anyị nwere ike ịbụ ndị mmekọ azụmahịa. Anyị kwenyere na anyị nwere ike ịmalite mmekọrịta azụmahịa ogologo oge n'etiti ibe anyị. Ị nwere ike ịkpọtụrụ anyị kpamkpam maka ozi ndị ọzọ na pricelist nke anyị ngwa ahịa ! Ị ga-abụ ihe pụrụ iche na ngwongwo ntutu anyị !!
    CAS: 9004-65-3

    Hydroxypropyl MethylCellulose (HPMC) na ọtụtụ-eji na-ewu, ọgwụ, nri, ịchọ mma, ncha, akọwa, dị ka thickener, emulsifier, film-bụbu, ihe nkedo, dispersing gị n'ụlọnga, na-echebe colloid.We nwere ike inye mgbe ọkwa HPMC, anyị nwekwara ike inye. gbanwetụrụ HPMC dị ka ndị ahịa chọrọ. Mgbe emezigharịrị na ọgwụgwọ elu, anyị nwere ike nweta ngwongwo ndị a na-agbasa na mmiri ngwa ngwa, gbatịa oge oghere, mgbochi-sagging, wdg.

    Ọdịdị Ọcha ma ọ bụ na-acha ọcha ntụ ntụ
    Methoxy (%) 19.0-24.0
    Hydroxypropoxy (%) 4.0 ~ 12.0
    pH 5.0-7.5
    Mmiri (%) ≤5.0
    Ihe fọdụrụ na mgbanye (%) ≤5.0
    Ọnọdụ okpomọkụ (℃) 70-90
    Nha urughuru min.99% gafere 100 ntupu
    Ọkwa ọkwa Viscosity (NDJ, mPa.s, 2%) Viscosity (Brookfield, mPa.s, 2%)
    HPMC MP400 320-480 320-480
    HPMC MP60M 48000-72000 24000-36000
    HPMC MP100M 80000-120000 40000-55000
    HPMC MP150M 120000-180000 55000-65000
    HPMC MP200M 160000-240000 Min70000
    HPMC MP60MS 48000-72000 24000-36000
    HPMC MP100MS 80000-120000 40000-55000
    HPMC MP150MS 120000-180000 55000-65000
    HPMC MP200MS 160000-240000 Min70000

    Ngwa a na-ahụkarị nke HPMC:

    Tile nrapado

    ● Ezigbo njide mmiri: ogologo oge mmeghe ga-eme ka tiling rụọ ọrụ nke ọma.

    ●Mgbara mma na nguzogide mmịfe: karịsịa maka taịlị dị arọ.

    ●Arụ ọrụ ka mma: mmanu na plasticity nke plasta na-ahụ n'aka, a pụrụ itinye ngwa ngwa ngwa ngwa ngwa ngwa.

    Plasta ciment / ngwa ngwa ngwakọta akọrọ

    ●Mfe akọrọ mix usoro n'ihi oyi mmiri solubility: akpụ guzobe nwere ike mfe zere, ezigbo maka arọ taịlị.
    ●Njide mmiri dị mma: mgbochi nke mmiri mmiri na-efunahụ ihe ndị ahụ, a na-edobe ọdịnaya mmiri kwesịrị ekwesị na ngwakọta nke na-ekwe nkwa ogologo oge.
    ●Mmụba mmiri na-achọsi ike: oge ​​na-emeghe oge, gbasaa ebe spry na usoro akụ na ụba.
    ●Mfe mgbasa na mma sagging iguzogide n'ihi mma agbanwe agbanwe.

    222-1024x343

    Wall putty

    ● Njide mmiri: oke ọdịnaya mmiri na slurry.
    ●Anti-sagging: mgbe na-agbasa a thicker kootu corrugation nwere ike zere.
    ●Mmụba ngwa ngwa: dabere na ịdị arọ nke ngwakọta akọrọ na nhazi kwesịrị ekwesị, HPMC nwere ike ịbawanye ụda ngwa agha.

    Sistemụ Mkpuchi na Mpụga (EIFS)

    ● Mmanya mmachi.
    ●Ike wetting dị mma maka bọọdụ EPS na mkpụrụ.
    ●Ibelata mbata ikuku na nnabata mmiri.

    Ịkwado onwe ya

    ● Nchedo site na mmiri na-ekpo ọkụ na nsị ihe.

    ●Ọ dịghị mmetụta na slurry fluidity na ala viscosity

    HPMC, ebe njirimara njide mmiri ya na-eme ka arụmọrụ gwụchara n'elu.

    444

    Ihe mkpuchi mgbawa

    ● Ọrụ ka mma: ọkpụrụkpụ kwesịrị ekwesị na plasticity.
    ● Ịdebe mmiri na-eme ka oge ọrụ dị ogologo.
    ●Sag eguzogide: mma ngwa agha bonding ikike.

    11111-1024x301

    Ngwa ọgwụ na ngwa nri:

    Ojiji Ọkwa ngwaahịa Usoro onunu ogwu
    Nnukwu Laxative 75K4000,75K100000 3-30%
    Ude, gel 60E4000,65F4000,75F4000 1-5%
    Nkwadebe anya 60E4000 01.-0.5%
    Anya tụlee nkwadebe 60E4000, 65F4000, 75K4000 0.1-0.5%
    Onye nkwusioru 60E4000, 75K4000 1-2%
    Antacids 60E4000, 75K4000 1-2%
    Mbadamba ụrọ 60E5, 60E15 0.5-5%
    Mgbakọ Wet granulation 60E5, 60E15 2-6%
    Ihe mkpuchi mbadamba 60E5, 60E15 0.5-5%
    Matrix mwepụta a na-achịkwa 75K100000,75K15000 20-55%

    Nkwakọ ngwaahịa:

    Ngwaahịa HPMC juru n'ọnụ n'ime akpa akwụkwọ oyi akwa atọ nwere akpa polyethylene dị n'ime agbakwunyere, nha ụgbụ bụ 25kg kwa akpa.

    Nchekwa:

    Debe ya n'ụlọ nkwakọba ihe dị jụụ, pụọ na mmiri, anwụ, ọkụ, mmiri ozuzo.


  • Nke gara aga:
  • Osote:

  • Ngwaahịa ndị emetụtara

    Mkparịta ụka WhatsApp n'ịntanetị!