ODM Factory Cellulose Ether HPMC Onye na-emepụta ihe kacha ukwuu na China, maka Motar, Wall Putty, Plaster Gypsum, Tile Adhesive and Detergent

Na anyị na-eduga technology nakwa dị ka mmụọ nke ọhụrụ, ibe imekọ ihe ọnụ, uru na mmepe, anyị ga-ewu a ọganihu ga-eme n'ọdịnihu ọnụ na gị na ụlọ ọrụ maka ODM Factory Cellulose Ether HPMC Biggest Producer na China, maka Motar, Wall Putty, Plaster Gypsum, Tile Adhesive and Detergent, Anyị ga-eme ike anyị niile iji gboo ma ọ bụ gafere mkpa ndị ahịa na ihe dị mma, echiche dị elu, na ụlọ ọrụ na-aga nke ọma na oge.Anyị na-anabata ndị ahịa niile.
Site na teknụzụ anyị na-eduga yana mmụọ nke imepụta ihe ọhụrụ, imekọ ihe ọnụ, uru na mmepe, anyị na ụlọ ọrụ gị a na-akwanyere ùgwù ga-ewu ọdịnihu ga-aga nke ọma.China Hydroxy Propyl Methyl Cellulose na HPMC, Ọdịmma dị oke mma, ọnụahịa asọmpi, nnyefe oge yana ọrụ a pụrụ ịdabere na ya nwere ike kwe nkwa.Maka ajụjụ ndị ọzọ, ị gaghị egbu oge ịkpọtụrụ anyị.Daalụ – Nkwado gị na-akpali anyị mgbe niile.
CAS: 9004-65-3

Hydroxypropyl MethylCellulose (HPMC) na ọtụtụ-eji na-ewu, ọgwụ, nri, ịchọ mma, ncha, akọwa, dị ka thickener, emulsifier, film-bụbu, ihe nkedo, dispersing gị n'ụlọnga, na-echebe colloid.We nwere ike inye mgbe ọkwa HPMC, anyị nwekwara ike inye. gbanwetụrụ HPMC dị ka ndị ahịa chọrọ.Mgbe emezigharịrị na ọgwụgwọ elu, anyị nwere ike nweta ngwongwo ndị a na-agbasa na mmiri ngwa ngwa, gbatịa oge oghere, mgbochi-sagging, wdg.

Ngwa a na-ahụkarị nke HPMC:

Tile nrapado

● Ezigbo njide mmiri: ogologo oge mmeghe ga-eme ka tiling rụọ ọrụ nke ọma.

●Mgbara mma na nguzogide mmịfe: karịsịa maka taịlị dị arọ.

●Arụ ọrụ ka mma: mmanu na plasticity nke plasta na-ahụ n'aka, a pụrụ itinye ngwa ngwa ngwa ngwa ngwa ngwa.

Plasta ciment / ngwa ngwa ngwakọta akọrọ

●Mfe akọrọ mix usoro n'ihi oyi mmiri solubility: akpụ guzobe nwere ike mfe zere, ezigbo maka arọ taịlị.
●Njide mmiri dị mma: mgbochi nke mmiri mmiri na-efunahụ ihe ndị ahụ, a na-edobe ọdịnaya mmiri kwesịrị ekwesị na ngwakọta nke na-ekwe nkwa ogologo oge.
●Mmụba mmiri na-achọsi ike: oge ​​na-emeghe oge, gbasaa ebe spry na usoro akụ na ụba.
●Mfe mgbasa na mma sagging iguzogide n'ihi mma agbanwe agbanwe.

Wall putty

● Njide mmiri: oke ọdịnaya mmiri na slurry.
●Anti-sagging: mgbe na-agbasa a thicker kootu corrugation nwere ike zere.
●Mmụba ngwa ngwa: dabere na ịdị arọ nke ngwakọta akọrọ na nhazi kwesịrị ekwesị, HPMC nwere ike ịbawanye ụda ngwa agha.

Sistemụ Mkpuchi na Mpụga (EIFS)

● Mmanya mmachi.
●Ike wetting dị mma maka bọọdụ EPS na mkpụrụ.
●Ibelata mbata ikuku na nnabata mmiri.

Ịkwado onwe ya

● Nchedo site na mmiri na-ekpo ọkụ na nsị ihe.

●Ọ dịghị mmetụta na slurry fluidity na ala viscosity

HPMC, ebe njirimara njide mmiri ya na-eme ka arụmọrụ gwụchara n'elu.

Ihe mkpuchi mgbawa

● Ọrụ ka mma: ọkpụrụkpụ kwesịrị ekwesị na plasticity.
● Ịdebe mmiri na-eme ka oge ọrụ dị ogologo.
●Sag eguzogide: mma ngwa agha bonding ikike.

Ngwa ọgwụ na ngwa nri:

Nkwakọ ngwaahịa:

Ngwaahịa HPMC juru n'ọnụ n'ime akpa akwụkwọ oyi akwa atọ nwere akpa polyethylene dị n'ime agbakwunyere, nha ụgbụ bụ 25kg kwa akpa.

Nchekwa:

Debe ya n'ụlọ nkwakọba ihe dị jụụ, pụọ na mmiri, anwụ, ọkụ, mmiri ozuzo.