Ngwa nke Sodium Carboxymethyl Cellulose na sịga na mkpanaka ịgbado ọkụ

Sodium carboxymethyl cellulose (CMC) nwere ngwa dị iche iche na ụlọ ọrụ karịrị ojiji ya. Ọ bụ ezie na ọ bụghị dị ka amara nke ọma, CMC na-achọta uru na ụfọdụ ngwa niche dị ka sịga na mkpanaka ịgbado ọkụ:

1. Siga:
   • Adhesive: A na-eji CMC eme ihe mgbe ụfọdụ dị ka ihe nrapado na-ewu sịga. Enwere ike itinye ya na mpempe akwụkwọ iji nyere aka mechie ihe ndochi ụtaba ma nọgide na-eguzosi ike n'ezi ihe nke ihe owuwu sịga. Ngwongwo nrapado CMC na-eme ka sịga na-anọgide na-akpachichi anya ma na-egbochi ụtaba ka ọ daa ma ọ bụ kpughee mgbe a na-ejizi na ise siga.
   • Ọkụ Ọkụ Modifier: Enwere ike ịgbakwunye CMC na akwụkwọ sịga dị ka ihe mgbanwe ọkụ ọkụ. Site n'ịgbanwe ntinye nke CMC na akwụkwọ ahụ, ndị na-emepụta ihe nwere ike ijikwa ọnụ ọgụgụ nke sịga na-ere ọkụ. Nke a nwere ike imetụta ihe ndị dị ka ahụmahụ ise siga, ntọhapụ ụtọ, na nhazi ntụ. CMC na-enyere aka ịhazi omume mgba ọkụ nke sịga, na-enye aka na ahụmịhe ise siga na-atọ ụtọ maka ndị na-azụ ahịa.
2. Mkpanado ịgbado ọkụ:
   • Flux Binder: N'imepụta mkpanaka ịgbado ọkụ, a na-eji CMC dị ka ihe nkedo na-ekpo ọkụ na electrodes mkpuchi. Flux bụ ihe a na-etinye na mkpanaka ịgbado ọkụ iji mee ka usoro ịgbado ọkụ dị mfe site n'ịkwalite nhazi nke oyi akwa slag na-echebe ma melite ogo weld. CMC na-arụ ọrụ dị ka ihe nkedo maka ihe ndị na-emegharị ahụ, na-enyere aka ịrapagidesi ike na elu nke isi mkpara ịgbado ọkụ. Nke a na-eme ka a mata nkesa otu nke ihe flux ma na-eme ka nkwụsi ike na ịdị irè nke mkpuchi n'oge ọrụ ịgbado ọkụ.
   • Arc Stabilizer: CMC nwekwara ike ije ozi dị ka ihe nkwụnye arc na mkpanaka ịgbado ọkụ. N'oge ịgbado ọkụ, arc eme n'etiti electrode na workpiece nwere ike na-adịkarị mfe enweghị ntụkwasị obi ma ọ bụ na-adịghị mma omume, na-eduga na-adịghị mma weld àgwà na njikwa. Ihe mkpuchi nke CMC nwere na mkpanaka ịgbado ọkụ na-enyere aka mee ka arc ahụ guzosie ike site n'inye ọkụ eletrik na-agbanwe agbanwe ma na-achịkwa. Nke a na-ebute mgbanye arc dị nro, njikwa arc ka mma, yana mmụba weld ntinye na ọnụego nkwụnye ego.

Na ngwa abụọ ahụ, sodium carboxymethyl cellulose (CMC) na-enye ihe pụrụ iche nke na-enye aka na arụmọrụ na arụmọrụ nke ngwaahịa ikpeazụ. Ihe nrapado ya, na-agbanwe ọnụego ọkụ na-agba ọkụ, njigide na-agbanwe agbanwe, yana ihe na-eme ka ọ bụrụ ihe mgbakwunye bara uru n'ichepụta sịga na mkpanaka ịgbado ọkụ, na-eme ka ịdịmma ha, nkwụsi ike, na iji ya rụọ ọrụ.