The reason why the cellulose production putty powder foams after use?

Cellulose produces putty powder, also known as wall putty or joint compound, which is a key material used in the construction industry. Its main job is to smooth out the walls and fill in the gaps between the drywall panels. When mixed with water, it forms a paste that is applied to walls and allowed to dry. However, many people reported that the putty powder foamed after use, leaving air bubbles on the wall. This could be due to a number of reasons, which are discussed below.

First of all, the quality of putty powder may be affected. There are many brands of putty powder on the market, it is very important to choose a good quality putty powder. Some manufacturers may use low-quality raw materials or additives, thereby affecting the quality of the final product. This kind of putty powder may cause foaming after use, resulting in uneven wall paint. To avoid this problem, it is advisable to buy putty powder from reputed brands that produce high-quality products.

Second, the mixing process may not have been done properly. Putty powder needs to be mixed with water in the correct proportions to ensure a smooth, easy-to-apply paste that dries evenly. If you add too much water, the paste may become too runny and frothy. Also, if you add too little water, the paste may be too thick to spread. To avoid this problem, it’s important to follow the directions on the package carefully and use the right amount of water for the amount of putty powder you’re using.

Third, environmental factors may cause the putty powder to foam. If the room temperature and humidity are too high or too low, the paste may dry unevenly, causing air pockets to form. Likewise, if there is too much dust or debris in the air, it may mix with the putty powder and cause it to foam. To avoid these problems, it is important to work in a clean and well-ventilated area and make sure the room temperature and humidity levels are within the recommended ranges.

Finally, improper construction techniques can also cause foaming of the putty powder. If the paste is applied too thickly or unevenly, it may not dry properly, causing air pockets to form. Likewise, if the putty knife is not cleaned properly or used too vigorously, it can damage the finish of the paste and cause it to bubble. To avoid these problems, it’s important to follow proper application techniques, such as applying the paste in a thin layer, smoothing it out with a putty knife, and cleaning the knife regularly.

To sum up, there are many factors that affect the foaming of putty powder after use. However, many of these problems can be avoided by choosing a quality product, using the right amount of water, working in a clean and well-ventilated area, and following proper application techniques. With the right approach, a smooth, even wall finish can be achieved that will last for years.