Putty powder is a kind of building decoration material, the main components are talcum powder and glue. I just bought a layer of white putty on the surface of the blank room. Usually the whiteness of the putty is above 90° and the fineness is above 330°. Putty is a kind of base material for leveling the wall, which lays a good foundation for future decoration (painting, wallpaper).
Putty is divided into two kinds: putty inside wall and putty on exterior wall. External wall putty can resist wind and sun, so it has good gelation, high strength and low environmental index. The comprehensive index of putty in the inner wall is good, and it is hygienic and environmentally friendly. Therefore, the inner wall is not for external use and the outer wall is not for internal use. Putties are usually based on gypsum or cement, so rough surfaces are easier to bond firmly. However, during construction, it is still necessary to brush a layer of interface agent on the base to seal the base and improve the adhesion of the wall, so that the putty can be better bonded to the base.
components
Putty is generally composed of base material, filler, water and additives. Base material, also known as binder, is the most critical component of putty and mainly plays various functions such as bonding. The most commonly used binders for putty are cement and organic polymers, and organic polymers can be divided into emulsion and latex powder. Cement is a cohesive, durable and cost-effective binder, but has poor tensile strength and crack resistance. Organic polymers can modify and toughen it, thereby improving the performance of putty.
The filler mainly acts as a filling, and the commonly used ones are calcium carbonate, talcum powder and quartz sand. Attention should be paid to the matching use of filler fineness.
Additives include thickeners, water retaining agents, etc. Thickeners and water-retaining agents play the role of water retention, improving storage and construction performance, and cellulose is generally used. Antifreeze is mainly to improve the storage stability of putty at low temperature. Slippery agent and water reducing agent are generally used in high-grade putty to improve the construction performance of putty.
Some also add fibers to play an anti-cracking effect.
Putty powder is a surface leveling powder material for pretreatment of the construction surface before paint construction. The main purpose is to fill the pores of the construction surface and correct the curve deviation of the construction surface, laying a good foundation for obtaining a uniform and smooth paint surface. , let’s take everyone to understand the formulas of various putty powders:
1. Common interior wall putty powder formula
latex powder 2～2.2%, Shuangfei powder (or talcum powder) 98%
2. Ordinary high-hard interior wall putty powder formula
latex powder 1.8～2.2%, Shuangfei powder (or talcum powder) 90～60%, Paris plaster powder (building gypsum, hemihydrate gypsum) 10～40%
3. Reference formula of high hardness and water-resistant interior wall putty powder
Formula 1: latex powder 1~1.2%, Shuangfei powder 70%, Ash calcium powder 30%
Formula 2: latex powder 0.8～1.2%, Shuangfei powder 60%, Ash calcium powder 20%, White cement 20%
4. Reference formula of high hardness, washable and anti-mold interior wall putty powder
Formula 1: latex powder 0.4～0.45%, Shuangfei powder 70%, Ash calcium powder 30%
Formula 2: latex powder 0.4～0.45%, Shuangfei powder 60%, Ash calcium powder 20%, White cement 20%
5. Reference formula of high-hardness, water-resistant, washable and anti-cracking exterior wall putty powder
Formula 1: latex powder 1.5~1.9%, white cement (black cement) 40%, double fly powder 30%, ash calcium powder 30%, anti-cracking additive 1~1.5%
Formula 2: latex powder 1.7~1.9%, white cement (black cement) 40%, double fly powder 40%, ash calcium powder 20%, anti-cracking additive 1~1.5%
Formula 3: latex powder 2～2.2%, white cement (black cement) 40%, double fly powder 20%, ash calcium powder 20%, quartz powder (180# sand) 20%, anti-cracking additive 2～3%
Formula 4: latex powder 0.6~1%, white cement (425#) 40%, ash calcium powder 25%, double fly powder 35%, anti-cracking additive 1.5%
Formula 5: latex powder 2.5-2.8%, white cement (black cement) 35%, double fly powder 30%, ash calcium powder 35%, anti-cracking additive 1-1.5%
6. Reference formula for elastic washable exterior wall anti-cracking putty powder
latex powder 0.8～1.8%, white cement (black cement) 30%, double fly powder 40%, ash calcium powder 30%, anti-cracking additive 1～2%
7. Reference formula of anti-cracking putty powder for mosaic strip tile exterior wall
Formula 1: latex powder 1~1.3%, white cement (425#) 40%, lime calcium powder 20%, double fly powder 20%, anti-cracking additive 1.5%, quartz sand 120 mesh (or dried river sand) 20%
Formula 2: latex powder 2.5~3%, white cement (black cement) 40%, double fly powder 20%, ash calcium powder 20%, quartz powder (180# sand) 20%, anti-cracking additive 2~3%
Formula 3: latex powder 2.2-2.8%, white cement (black cement) 40%, double fly powder 40%, ash calcium powder 20%, anti-cracking additive 1-1.5%
8. Reference formula for water-resistant and anti-cracking putty powder for elastic mosaic tile exterior walls
latex powder 1.2-2.2%, white cement (black cement) 30%, Shuangfei powder 30%, ash calcium powder 20%, quartz powder (sand) 20%, anti-cracking additive 2-3%
9. Reference formula for flexible interior wall putty powder
Formula 1: latex powder 1.3～1.5%, Shuangfei powder 80%, Ash calcium powder 20%
Formula 2: latex powder 1.3-1.5%, Shuangfei powder 70%, Ash calcium powder 20%, White cement 10%
10. Reference formula of flexible exterior wall putty
Formula 1: latex powder 1.5-1.8%, Shuangfei powder 55%, lime calcium powder 10%, white cement 35%, anti-cracking additive 0.5%
11. Color exterior wall putty powder formula
Colored putty powder 1-1.5%, white cement 10%, refined lime calcium powder (calcium oxide ≥ 70%) 15%, anti-cracking additive 2%, bentonite 5%, quartz sand (whiteness ≥ 85%, silicon ≥ 99%) ) 15%, yellow jade powder 52%, color putty modifier 0.2%
12. Tile adhesive formula
Tile adhesive powder 1.3%, ordinary Portland cement 48.7%, construction sand (150~30 mesh) 50%
13. Formula of dry powder interface agent
Dry powder interface agent latex powder 1.3%, ordinary portland cement 48.7%, construction sand (150~30 mesh) 50%
14. Tile anti-mildew sealant formula
Formula 1: latex powder 1.5-2%, ordinary Portland cement 30%, high alumina cement 10%, quartz sand 30%, Shuangfei powder 28%
Formula 2: latex powder 3-5%, ordinary portland cement 25%, high alumina cement 10%, quartz sand 30%, double fly powder 26%, pigment 5%
15. Formula of dry powder waterproof coating
Waterproof coating powder 0.7~1%, cement (black cement) 35%, lime calcium powder 20%, quartz sand (fineness>200 mesh) 35%, double fly powder 10%
16. Gypsum bonding latex powder formula
Formula 1: Gypsum adhesive powder 0.7~1.2%, plaster of paris (hemihydrate gypsum, gypsum powder) 100%
Formula 2: Gypsum adhesive powder 0.8~1.2%, plaster of paris (hemihydrate gypsum, gypsum powder) 80%, double fly powder (heavy calcium) 20%
17. Gypsum powder formula for plastering
Formula 1: Gypsum stucco powder 0.8~1%, plaster of paris (hemihydrate gypsum, gypsum powder) 100%
Formula 2: Gypsum plaster powder 0.8~1.2%, plaster of paris (hemihydrate gypsum, gypsum powder) 80%, double fly powder (heavy calcium) 20%
18. Formula of water-based wood putty powder
Water-based wood putty powder 8-10%, Shuangfei powder (heavy calcium powder) 60%, gypsum powder 24%, talcum powder 6-8%
19. High anhydrite gypsum putty powder formula
Putty latex powder 0.5～1.5%, plaster powder (building gypsum, hemihydrate gypsum) 88%, talcum powder (or double fly powder) 10%, gypsum retarder 1%
20. Ordinary gypsum putty powder formula
Putty latex powder 1~2%, plaster powder (building gypsum, hemihydrate gypsum) 70%, talcum powder (or Shuangfei powder) 30%, gypsum retarder 1%
Post time: Apr-13-2023