Directly mix sodium carboxymethyl cellulose and water to prepare paste glue for use. When assembling sodium carboxymethyl cellulose glue, please add a certain amount of water to the batching tank with mixing equipment.
In the case of opening the mixing equipment, slowly and evenly sprinkle the sodium carboxymethyl cellulose into the batching tank, and keep stirring, so as to fully mix the sodium carboxymethyl cellulose and water, and make the sodium carboxymethyl cellulose fully molten. The basis for judging the mixing time is: when the sodium carboxymethyl cellulose is uniformly dispersed in the water and there are no obvious large lumps, the mixing can be stopped, and the sodium carboxymethyl cellulose and the water can be allowed to stand. In this case, they saturate and blend with each other.
First, the sodium carboxymethyl cellulose and white sugar and other materials are mixed in a dry way, and then poured into water to dissolve. During the operation, the sodium carboxymethyl cellulose, white sugar and other materials are put into a certain proportion. In a stainless steel mixer, close the lid of the mixer and keep the material sealed in the mixer. Then, turn on the mixer to mix the sodium carboxymethyl cellulose and other materials, then sprinkle the mixed sodium carboxymethyl cellulose mixture slowly and evenly into the mixing tank filled with water and mix continuously.
When using sodium carboxymethylcellulose in liquid or pulp foods, homogenize the mixture for finer alignment and stability. The pressure and temperature used in the homogenization process should be determined according to the characteristics of the material and the quality requirements of the product.
Post time: Nov-04-2022